Every now and then, firmware is rolled out so that one can update it and use the Netgear Orbi router to the latest version. However, despite understanding this and trying to update Orbi firmware, many users have failed to finish the process. By any chance, in case you are amongst them, you ought to take a quick look at the troubleshooting tips given here. You should know that some of these tips can also help one to fix the Orbi purple light issue.
[Fixed] Netgear Orbi Firmware Update Failure Issue
1. Follow the Right Procedure
Prior to following any other troubleshooting procedure, try to update the firmware of the Orbi using the Orbi login details again. Chances are that you skipped one step in between which caused this ruckus. Thus, do as required and see in case the issue in debate has been resolved for you or not. In case, you are still experiencing it, you need to give the next fix a try. We are expecting that it will help you to get out of the mess you are in right now.
2.Check the WiFi Connection
The second factor which could have contributed to the Netgear Orbi firmware update failure issue is that the WiFi connection is not up to the mark. By this, we mean, the speed of the internet on your client device is not good enough. To take care of the problem, you need to unplug the cable from the client as well as the networking device and then connect it after waiting for more two minutes. See if you are able to get back online after this.
3.Avoid Any Third-Party Site
Many times, users make the mistake of referring to the wrong websites to update the firmware or software of their Netgear Orbi devices. We are assuming that you might be amongst them. To rectify your mistake, you ought to avoid referring to third-party websites from now on and instead read the steps given on the official website of Netgear. In case you need an alternative, then you can also read the ones given in the user manual of your Orbi.
4.Use the Other Orbi Method
Have you been using the manual method to update the Netgear Orbi device? Well, there could be a chance that it is not suiting it. To prevent it from doing this any further, take our advice and use the other method to execute the same process. In other words, you need to put the Netgear Orbi app to use. For your information, you will have to log in to the app before you start using it to go about the Netgear Orbi firmware update process.
5.Download an Antivirus App
Getting an antivirus application installed on your client device is yet another effort that should be made from your end to resolve the Netgear Orbi firmware update failure issue. Although you should have done this prior to performing the Orbi setup process, but, given you did not do the same, do not blame yourself over it. Instead, take the action and access the store of your device to download the best antivirus application. At last, start using it.
The Conclusion
With the last troubleshooting solution, we are concluding the article written on the tips through which resolving the Netgear Orbi firmware update failure issue is possible. In case, you are still experiencing the problem even after going through the tips given above, then you should consider resetting the device to the factory default settings. To learn about the execution of the process, go through the steps given in the product manual.
